MMT-2000 Contents of the Proceedings

 

                    Structure and properties

 SECTION 13-1

 

 Invited lecture

Metastability and thermodynamics of bulk metallic glass forming alloys

H.J. Fecht, W.L. Johnson……………………………………...……

  

 

Paper

 

The computer assisted design of carburizing parameters

S. Fatu, C. Serban, V. Luca, R. Popescu……………………………...............................…………..

 

 


Paper

 

Modeling of residual stresses in metal matrix composites using digital image based technique and homogenization method

D. Golanski, J. Grzes, N. Kikuchi, M. Kozlowski………….………

 

 

 
Paper

 

A mathematical model of deformation-enhanced diffusion under cyclic plastic loading in mechanical alloying

B.B. Khina…………………………………………………...…………

 

 

 
Paper

 

Probabilistic modeling of the elastic-plastic behavior of   63Sn-37Pb solder alloys

L.L. Meekisho, K. Nelson-Owusu……………………………………...…

 

 


Paper

 

The cluster component method in theory of solutions

A. Men, I. Sinitsky……………………………………………………….

 

 

Paper

 

A hybrid system for the design and processing of C-Mn and microalloyed steels

P. A. Manohar, R.J.Dippenaar, S. S. Shivathaya………………………

 

 

Paper

 


BS00900A.gif (904 bytes)
Top

 

          Modeling of the processes in metal-slag system

SECTION 13-2

 

 Invited lecture

Modeling of metallurgical reactions towards process simulations

S. Seetharaman, Du Sichen, A. Jakobsson, R.E. Aune…………………………..

 

 

Paper

 

Invited lecture

Kinetic model of oxidation reactions between molten iron of high carbon concentration and iron oxide containing slag

M. Sano…….…………………………………………………………………

 

 

 

 
Paper

 

Invited lecture

The IRSID slag model for steelmaking process control

J. Lehmann, H. Gaye, P. Rocabois………………………………………..……

 

 

 

Paper

 

Change of short-range order in liquid pure metals and alloys as function of temperature and composition: application of computer simulation and of the Voronoy polyhedra methods

B.R. Gelchinski, A.A. Mirzoev, N.P. Smolin, G.P. Vyatkin……………………...

 

 

 

 Paper

 

Open chemical equilibria and coefficients of thermodynamic activity

B. Zilbergleyt…………………………………………………...……………….

 

 

Paper

 

The application of dynamic model based on neural network & knowledge base for LD converter

Du Bin, Zhou Xiaohua…………………………………………...……………...

 

 

 
Paper

 

Modeling of metallurgical processes in electroslag technologies

S. Shanchurov……………………………………………………..……………

 

 

Paper

 

BS00900A.gif (904 bytes) Top

 

                    Technological processes simulation

SECTION 14-1

 

 The mathematical modeling of the fluidized bed carburising

D. Dragomir, L. Druga, L. Adomnica……………………………………………

 

Paper

 

Development of new welding materials and technologies based on computer simulation

M. Zinigrad…………..…………………………………………………………

 

 

 
Paper

 

The effectiveness of laser plasma material processes

B. Medres, L. Shepeleva, W.D. Kaplan and M. Bamberger………………….….

 

 

Paper

 

Analysis of TIG ARC plasma with special emphasis on temperature and current distribution along the cathode end surface

Jong-Hee Lee, Suck-Joo Na…………………………………………..………..

 

 

 
Paper

 

Analysis of asymmetrical rolling process for bimetal sheet with rigid
 plastic FEM

Shi Qingnan, He Yanling, Wei Wei……………………………………………...

 

 

 
Paper

 

Solution of practical welding tasks by adapted interfaces for different software and welding advisory system

A. Scharff, H. Rudert, C. Kothe, A. Hantke, H. Benedix………………………..

 

 

 
Paper

 

Methods of determination of potash and aluminum as inhomogeneity indicators of welding wire flux

R. Levin, R. Shapira, V. Shumyakov……………………………………….……

 

 


Paper

 

Complex modeling of the blast-furnace processes for prediction and analysis of the furnace operation parameters

I.G. Tovarovskiy, A.I. Krasavtsev, S.L. Yaroshevskiy……………………….….

 

 

 
Paper

 

Novel method of welding materials design

V. Mazurovsky , M. Zinigrad, A. Zinigrad……………………………….………

 

 

Paper

BS00900A.gif (904 bytes) Top

 

         Modeling and simulation in multi-component system

SECTION 14-2

 

 Invited lecture

A logical approach to mould powder selection

K.C. Mills, A.B. Fox, M.C. Bezerra…………………………………………….

 

 

 Paper

 

Invited lecture

Thermochemical modeling of multicomponent slags

Du  Sichen, J. Bjφrkvall, R.E. Aune, S. Seetharaman…….………………………

 

 

 

Paper

 

Modeling the electrochemical characteristics of graphite and transition metal oxide thin film electrodes: A quasi-metallic approach

M.D. Levi, D. Aurbach…………………….…………………………………..

 

 

 
Paper

 

Mathematical simulation of water and benzene penetration in thin polystyrene films and experimental investigation of the mass transport

processes by FEWS-FTIR  spectroscopy procedure

A. Sheshnev, E. Bormashenko, J. Reiclin, R. Pogreb, E. Shulzinger, A. Katzir….

 

 

 

 
Paper

 

Invited lecture

Mathematical model for forecasting chemical and phase composition of multicomponent metal alloys at equlibrium
V. Boronenkov………………………………………………………………...

 

 

 

Paper

 

Application of a new pseudopotential approach to liquid Na-K-Cs system

N.E. Dubinin, T.V. Trefilova, A.A. Yuryev, N.A. Vatolin………………...……...

 

 

Paper

 

The model of miscibility phase transitions in mixed Jahn-Teller systems

A.Y. Fishman, M.A. Ivanov, K.Y. Shunyaev, N.K. Tkachev……………….…...

 

 

Paper

 

A phase field model for the solidification of multicomponent alloys

Pil-Ryung Cha, Dong-Hee Yeon, Jong-Kyu Yoon…………………………..

 

 

Paper

 

Computer simulation of liquid metals using their structure data

D.K. Belashchenko……………………………………………………………

 

 

Paper

     

 

BS00900A.gif (904 bytes) Top

 

                            Materials structure formation

SECTION 14-3

 

 Invited lecture

The application of CAE in superalloy fields at HTMRI CISRI
Feng Di, Z. Long, J. Hu, J. Wu……………………………………………….

 

 
Paper

 

Macroscopic manifestation of local disorder in mixed crystals and alloys

Yu.Rosenberg, V.Sh. Machavariani, A.Voronel, S. Garber, A. Rubstein,

A.I. Frenkel, E.A. Stern.……………………………………………………….

 

 

 

Paper

 

The thermodynamic analysis of forming of the ekotoxicant in the metallurgical processes

L.I. Leontiev, A.K. Zaitsev, Y.S. Yusfin……………………………………...

 

 

 
Paper

 

Local structure of disordered AU-CU alloys

A.I. Frenkel, V.Sh. Machavariani, A. Rubstein,Yu. Rosenberg,

A. Voronel, E.A. Stern………………………………………………………...

 

 

 

Paper

 

Kinetics of microstructural evolution under the L1-two and L1-zero - type orderings in FCC alloys

D.K. Belashchenko, V.Y. Dobretsov, I.R. Pankratov, G.D. Samolyuk,

V.G. Vaks……………………………………………………...………………

 

 

 

 
Paper

 

Interface structure in AL-Be system

G. Zamir, A. Kiv, E. Abramov………………………………………………...

 

 

Paper

 

A new approach to the solidification modeling of casting processes

V.S. Lerner, Y.S. Lerner………………………………………………………

 

 

Paper

 

Numerical simulation for a/g transformation in Fe-Mn-C system by phase-field model

Dong-Hee Yeon, Pil-Ryung Cha, Jong-Kyu Yoon……………………………

 

 


Paper

 

BS00900A.gif (904 bytes) Top

 

             Heat and mass transfer modeling

SECTION 14-4

 

 Modeling heat transfer in thin layers of granular composite materials by cellular automata

B.B. Khina, I.P. Samtsevich…………………………………………………..

 

 
Paper

 

Modeling of heat and mass transfer and gas dynamics of shaft furnaces to optimize their design and operating parameters

Y. Gordon, V. Shvidkiy, Y. Yaroshenko……………………………………...

 

 

 
Paper

 

Numerical simulation of the coupled fluid flow and heat transfer and optimization of flow control devices in a six-strand tundish

Fan Junfei, Zhu Miaoyong, Lu Jinxiong, Zhang Qinglang……………………

 

 

 
Paper

 

Modeling SHS in porous system using cellular automata approach

B.B. Khina, D.N. Loban……………………………………………………….

 

 

Paper

 

Heat transfer during preparation of amorphous metallic alloy ribbon

M. Geller, E. Brook-Levinson, V. Manov…………………………………….

 

 

Paper

 

The cast iron with spheroidal graphite isothermal heat treated replace steels

C. Serban, V. Luca, S. Fatu, R. Popescu………………………………………

 

 

Paper

 

Mathematical simulation of the weldability of modern structural steels

V. Makhnenko, P. Seyffarth…………………………………………………..

 

 

Paper

 

BS00900A.gif (904 bytes) Top

 

        Prediction of composition and properties

SECTION 15-1

 

 Prediction of mechanical properties of hot-strips based on neural network

Jiansheng Feng, Shaomin Wu…………………………………………………

 

Paper

 

Polymerization process research in oxide melts by molecular dynamics and statistical-geometrical methods

L.I. Voronova, V.I. Voronov, J.V. Gluboky…………………………………..

 

 

 
Paper

 

Mathematical simulation of total deformations of thin steel sheets at Wear-Resistant Single-Sided cladding

V. Makhnenko, P. Seyffarth…………………………………………………..

 

 

 
Paper

 

Investigations of structure of a system SiO2-MgO by the method of “Covalent bonds network covering”

V.I. Voronov, L.I. Voronova………………………………………………….

 

 

 
Paper

 

Termodynamical aspects of nuclei formation and structure formation of metals during reduction of oxides

L.I. Leontiev, S.V. Shavrin, V.A. Gorbachev, G.M. Maizel………………….

 

 

 
Paper

 

Forecasting deposit metal and slag compositions during welding by composite wires and covered electrodes

V. Boronenkov ,  A.  Zubov…………………………………………………...

 

 

 
Paper

 

Regularities of forming of the structure of the materials undergoing phase transformation

L.I. Leontiev, S.V. Shavrin, V.A. Gorbachev, G.M. Maizel………………….

 

 

 
Paper

 

Application of mathematical modeling for research an development of weld alloys

N.V. Korolev, O.V. Pimenova, N.M. Razikov………………………………..

 

 

Paper

 

Computer method for calculation of stick electrode coating composition
M.P.Shalimov, A.S.Tabatchikov, A.N.Sergeev………………………………

 

 
Paper

 

Surface phases of silver and tin in crystalline and liquid copper-based alloys

G.P.Vyatkin, T.P. Privalova, T.O. Alekseeva, A.E.Chudakov, S.I. Morozov,

A.V. Gusev…………………………………………………………………….

 

 

 

Paper

 

Correlation between service-induced microstructural changes and aging kinetics of rejuvenated Ni-base superalloy gas turbine blades

E. Lvova, D. Norsworthy……………………………………………………...

 

 

 
Paper

 

Predicting weld structure using modified Schaeffler constitution diagram

V. Mazurovsky, A. Zinigrad, M. Zinigrad…………………………………….

 

 

Paper

 

BS00900A.gif (904 bytes) Top

 

               Diffusion processes modeling

SECTION
15-2

 

 Invited lecture

The significance of interfacial phenomena in the metallurgical processes

Tarek El Gammal……………………………………………..………………

 

 

Paper

 

Modeling of materials disintegration during reactive diffusion of environmental components

A. Katsman, L. Levin………………………………………………………….

 

 

 
Paper

 

An approach to the modeling of extrusion / drawing of bi-metallic composites

G. Miszuris, W. Miszuris, R. Sliwa , S. Alexandrov………………………….

 

 

Paper

 

The mathematical modeling of the diffusion process in the case of chromization

A. Veteleanu, V. Jiman………………………………………………………..

 

 

Paper

 

Detection of core-collapsed atoms by XPS measurements

V.Sh. Machavariani, A. Voronel……………………………………………….

 

 

Paper

 

Oxidation-reduction modeling of electroslag remelting

L. Levkov, Ya. Vasiliev, A. Shirshikov, A. Smirnov…………………………

 

 

Paper

 

The model of diffusion in system with multi-well potential at Jahn-Teller ions

A.Y. Fishman, V.B. Vykhodets……………………………………………….

 

 

Paper

 

Simulation of electrochemical growth of polycrystalline deposit under galvanostatic conditions

E. Zinigrad, D. Aurbach……………………………………………………….

 

 

 
Paper

 

Investigations of Na2O influence on structure of Al2O3-CaF2 in model experiment

O.I. Bukhtoyarov, B.S. Vorontsov, S.G. Komogorova………………………….

 

 

Paper

 

Estimation of the intrinsic heterogeneity of conducting composites

V.Sh. Machavariani, A.Voronel……………………………………………….

 

 

Paper

 

BS00900A.gif (904 bytes) Top

 

           Technological processes simulation

SECTION 15-3

 

 Invited lecture

Modeling of welding processes through order of magnitude scaling

P.F. Mendez, T.W. Eagar……………………………………………………

 

 

 Paper

 

The special technology of amorphous materials production

V.S. Tsepelev, B.A. Baum, G.V. Tjagunov, V.I. Ladjanov,

K.Y. Shmakova, A.N. Vloh…………………………………………………

 

 

 

Paper

 

The encapsulation of nickel nanoparticles in carbon obtained by the sonochemical decomposition of Ni(C8H12)2

Y. Koltypin, A. Fernandez, T.C. Rojas, M.J. Sayagues, A. Caballero,
J. Campora, P. Palma, L. Ponsonnet, B. Vacher, J.M. Martin, R. Prozorov,
A. Gedanken…………………………………………………………………

 

 

 

 
Paper

 

Stress estimation in brazed Al2O3-FeNi42 joints by means of FEM and automated grating interferometry

D. Golanski, W. Wlosinski, P. Cegielski, A. Kolasa, M. Kujawinska,

L. Salbut………………………………………………………………………

 

 

 

 
Paper

 

Energy absorption and penetration in selective laser sintering: A ray tracing model

X.C. Wang, J.P. Kruth………………………………………………………

 

 

Paper

 

Modeling of liquid metal oxidation at arc metallization

J. Korobov, V. Boronenkov…………………………………………………...

 

 

Paper

 

BS00900A.gif (904 bytes) Top

 

               Structure and properties

SECTION 15-4

 

 Investigation on physico-mechanical properties and local distribution of metal microstructures using scanning acoustic microscopy

R.G. Maev……………………………………………………………………..

 

 
Paper

 

Ultrasonic impact treatment. Physics of the Process. Application. Results. Design features. Equipment

E.S. Statnikov………………………………………………………………….

 

 

 
Paper

 

Noises analysis used for defects identification on pieces

V. Luca, S. Fatu, C. Serban, R. Popesku……………………………………...

 

 

Paper

 

Geometrical model of icosahedral quasicrystal: construction of quasiperiodic lattice by means of symmetry operations

A.A. Polyakov………………………………………………………………..

 

 

 
Paper

 

Dicing of electronic elements and circuits with thick layers of copper

B. Statnikov, T. Weiss, K. Gridish, M. Elgamil………………………………

 

 

Paper

 

Caking processes optimization principles

L.I. Leontiev, S.V. Shavrin, V.A. Gorbachev, G.M. Maizel………………….

 

 

Paper

 

Calculations of thermodynamic properties and liquidus lines of binary and ternary melts taking into account of complexes of different shape and size

K.Y. Shunyaev………………………………………………………………

 

 

 
Paper

 

New intensive drying mechanism of capillary-porous mineral composites

G.M. Maizel, A.P. Butkarev, V.I. Klein, E.V. Nekrasova……….……………

 

 

Paper

 

                                                                                                   MMT-204.jpg (1765 bytes)