The Tenth International Conference on
Material Technologies and Modeling
MMT-2018

Proceedings contents

PREFACE

ix

       1. Session "Materials Technologies and Modeling"

Keblinski P.

MODELING OF HEAT FLOW ACROSS INTERFACES.

1-1

Mauntz Manfred R., Peuser Jörn

DEEP ONLINE ANALYSIS OF DIELECTRIC PARAMETERS FOR LUBRICANTS AND INSULATION OILS WITH AN INNOVATIVE OIL SENSOR SYSTEM: IDENTIFICATION OF CRITICAL OPERATION CONDITIONS OF INDUSTRIAL GEARBOXES AND HIGH VOLTAGE TRANSFORMERS FOR REDUCTION OF FAILURE RATES AND LIVE TIME ENHANCEMENT.

1-10

Komarov S., Yamamoto T.

ULTRASONIC-ASSISTED IMPROVEMENT OF SOLIDIFICATION STRUCTURE IN DC CASTING OF ALUMINUM ALLOY.

1-19

K. C. Hari Kumar and Soumya Sridar.

CALPHAD MODELLING OF CERAMIC SYSTEMS.

1-29

Hesse O., Friedrich T., Kunert M., Efremenko V., Andrushchenko M., Osipov M., Brykov M.

PHASE COMPOSITION IN THE NEAR-SURFACE REGION OF A METASTABLE AUSTENITIC STEEL AFTER ABRASIVE WEAR.

1-39

Kantor M., Assous F., A. Golubchik

REVIEW OF COMMON PHENOMENA AND PROBLEMS OF PARTICULATE REINFORCED HYPER VISCOELASTIC RUBBER-LIKE COMPOSITE MATERIALS.

1-49

Subankulova D., Osmonalieva A., Lokshina I., Kharchenko A., Lugovskoy S., Gainullina I., Karabaev S.

SORBENTS FROM VEGETABLE RAW MATERIALS.

1-60

Finkelstein A., Furman E., Husnullin D., Borodianskiy K.

SOUND ABSORPTION IN REPLICATED ALUMINUM FOAM.

1-68

Snizko L., Holovenko V., Kalinichenko O., Roienko K., Girin O., Pivovarov O.

ELECTROLYTES FOR PLASMA ELECTROLYTIC OXIDATION OF MAGNESIUM.

1-79

Gnedenkov S.V., Sinebryukhov S., Mashtalyar D., Imshinetskiy I., Nadaraia K.

COMPOSITE POLYMER-CONTAINING COATINGS ON MAGNESIUM ALLOYS FOR INDUSTRY APPLICATION.

1-90

Shalimov M., Votinova E.

ANALYSIS OF POSSIBILITY TO APPLY MATHEMATICAL MODELS OF ELEMENT TRANSITION IN ARC WELDING.

1-100

Shanchurov S., Ivanajskij E., Ishkov A.,  Ivanajskij V.

OXIDISING-DEOXIDIZING POTENTIAL OF THE CONTROLLED ATMOSPHERES FOR WELDING AND HEAT TREATMENT OF STEELS WITH THE SPECIAL SYSTEMS OF ALLOYING.

1-105

Sukhov A., Malysh M., Shancurov S., Leder M., Lednov S.

RESEARCH OF LASER CUTTING OF TITANIUM ALLOYS.

1-112

Ryltsev R., Klumov B., Chtchelkatchev N., Shunyaev K.

COMPUTATIONAL CRYSTALLIZATION OF Cu-Zr-Al GLASS-FORMING ALLOYS.

1-122

Song-Jeng Huang, Murugan Subramani, Dawit Bogale Alemayehu, Tien-His Lee, Kou-Chen Liu.

MECHANICAL BEHAVIOR ENHANCEMENT OF MAGNESIUM ALLOY AZ61 WITH MICRO-SiC PARTICLES.

1-130

Averbukh M., Lugovskoy S., Kossenko A.

COMPREHENSIVE ANALYSIS OF CARBON FELT ELECTRICAL PROPERTIES BEING IN DIFFERENT ENVIRONMENTS.

1-148

Sobolev A., Kossenko A., Zinigrad M., Borodianskiy K.

CREATION OF OXIDE COATING ON AL 1050 ALLOY.

1-158

Sharon Y., Cheskis D.

VERY ACCURATE LOW CURRENT HALL EFFECT MEASUREMENTS.

1-165

Nabwani M., Suleymanov M., Pinhasi Y., Yahalom A.

RETARDATION IN THE SERVICE OF REAL TIME FAULT DETECTION AND THE DI_ERENCE BETWEEN DISTRIBUTED AND LUMPED FAULT MODELS.

1-171

       2. Session "Corrosion".  

Gnedenkov A. S., Sinebryukhov S., Mashtalyar D., Gnedenkov S.V.

ELECTROCHEMICAL BEHAVIOUR OF THE 1579 Al ALLOY WITH WELDED JOINT: CORROSION FEATURES AND COATING PROTECTION.

2-1

Neizvestny G.

EXTERNAL INDIRECT INSPECTIONS METHODS EVALUATION (ECDA) OF NEW BURIED STEEL PIPELINES WITH 3-LAYER HDPE COATING.

2-9

Sinebryukhov S., Gnedenkov S. V., Egorkin V., Vyaliy I.

CORROSION INHIBITIVE PROPERTIES OF THE HYDROPHOBIC COATINGS ON PEO-PRETREATED ALUMINUM ALLOY.

2-10

Kazanski B., Lugovskoy A., Zinigrad M.

EFFECT OF PLASMA ELECTROLYTIC OXIDATION TREATMENT ON CORROSION BEHAVIOR OF AZ91D, AM50, AE42 AND MRI 230D MAGNESIUM ALLOYS.

2-20

       3. Workshon "Applied mechanics, structural engineering and seismic design"

Ofer-Rozovsky E., Arbel-Haddad M., Bar-Nes G., Katz A.

PHASE TRANSFORMATIONS IN METAKAOLIN-BASED SYSTEMS AT MODERATE TEMPERATURES IN PRESENCE OF NITRATE.

3-1

Abdukadirov S. and Ayzenberg-Stepanenko M.

CALCULATION ALGORITHMS AND THE NUMERICAL SIMULATION OF TRANSIENT WAVE PROCESSES IN ELASTIC SOLIDS AND STRUCTURES.

3-12

Abdukadirov S.

DYNAMICS OF STRUCTURED ELASTIC HALFSPACE UNDER ACTION OF TRAVELING LOADING.

3-27

Capozucca R., Pace G., Gasparini B.

ANALYSIS AND STRENGTHENING OF RC MANUFACTURING FRAME STRUCTURES DAMAGED BY EARTHQUAKE.

3-40

       4. Workshop on Nanotechnology

Bairamukov V., Presniakov M., Lebedev V., Kapustin V., Tikhonov V.

STRUCTURE, CHEMICAL AND RADIATION RESISTANCE OF METAL CARBON NANOCOMPOSITES - PYROLYZED DERIVATIVES OF BIS-PHTHALOCYANINES OF RARE-EARTH ELEMENTS AND ACTINIDES.

4-1

Ichkitidze L., Gerasimenko A., Telishev D., Petuhov V., Podgaetski V., Selishchev S.

LAYERS OF COMPOSITE NANOMATERIALS AS PROTOTYPE OF A TENSORESISTOR SENSOR

4-8

Kamanina N.

ADVANTAGES OF MATERIALS SURFACE STRUCTURATION WITH CARBON NANOTUBES: ZnS OPTICAL CERAMIC.

4-20

Bei Liu, Subiyanto Iyan, Kou-Chen Liu.

LOCALIZED SURFACE PLASMON RESONANCE ENHANCED EFFICIENCY OF POLYMER LIGHT EMITTING DIODES BY DOPING GOLD NANOPARTICLES.

4-25

Likhomanova S., Kamanina N.

MECHANISMS OF THE OPTICAL LIMITING IN THE COANP-FULLERENES AND RELATED SYSTEM.

4-28

Stepanov A., Nuzhdin V., Valeev V., Rogov A., Vorobev V., Osin Y.

FABRICATION AND APPLICATIONS OF THIN SILICON AND GERMANIUM LAYERS WITH IMPLANTED SILVER NANOPARTICLES.

4-33

Rozhkova N., Kovalchuk A., Rozhkov S., Goryunov A.

MULTIFUNCTIONALITY OF GRAPHENE FROM AQUEOUS DISPERSIONS OF HYBRID CARBON-METAL NANOPARTICLES.

4-43

Song-Jeng Huang, Wei-Yi Peng, Bojana Visic, Alla Zak, Chia-Han Ho, Y. Feldman , R. Tenne, Addisu Negash Ali

STRENGTHENING OF Mg/WS2 AND Al/WS2 INORGANIC NANOTUBES METAL MATRIX COMPOSITES.

4-49

Zagidullina Ju., Kamanina N.

STUDY OF THE OPTICAL CERAMICS PROPERTIES: MgF2

4-61

Abitha VK and Sabu Thomas.

ENGINEERING AT THE NANOSCALE: A STRATEGY FOR DEVELOPING HIGH PERFORMANCE FUNCTIONAL POLYMERIC MATERIALS.

4-67

Titlov A., Krushenko G., Reshetnikova C., Borodianskiy K.

NANOMODIFICATION OF ALUMINUM ALLOYS.

4-76

       5. Workshop on Biomaterials

Astashina N., Smetkin A., Kachenyuk M., Rapekta S.

DEVELOPMENT OF IMPLANTATION SYSTEMS BASED ON CARBON COMPOSITE AND TITANIUM ALLOY

5-1

Ichkitidze L., Selishchev S., Gerasimenko A., Demidenko N.

THE LAYERS OF BIOLOGICAL COMPOSITE NANOMATERALS AS ELECTRODES IN AN ARTIFICIAL MUSCLE.

5-7

Astashina N., Lugovskoy A., Kossenko A., Lugovskoy S., Zinigrad M., Nakonechny F.

ANALYSIS OF EFFICIENCY OF DENTAL IMPLANT OSSEOINTEGRATION CHARACTERIZED BY VARIOUS SURFACE TYPES.

5-18

       6. Workshop "Terahertz FELs and Gyrotrons"

Balal N., Bratman V., Lurie Yu.

POSSIBILITY OF SUPER-RADIANCE IN THE FREQUENCY RANGE OF 3-5 THz FROM SHORT ELECTRON BUNCHES MOVING IN MICRO-UNDULATORS.

6-1

Ben-Moshe R., Bratman V., Zavol’sky N., Kalynov Yu., Fedotov A., Einat M.

THE POSSIBILITY OF EFFICIENT SUB-TERAHERTZ SECOND-HARMONIC GENERATION IN LOW-VOLTAGE GYROTRONS.

6-10

Bratman V., Fedotov A., Luchinin A., Kalynov Yu., Vilkov M., Zheleznov I.

TERAHERTZ LARGE ORBIT GYROTRON AND GYROTRINO AS ALTERNATIVES TO CONVENTIONAL GYROTRONS.

6-18

Mazor O., Bukai M., Rodnizki Ja., Ziskind G., Dyunin E.

A STUDY OF SELF-CONSISTENT ELECTROMAGNETIC AND COOLING CONFIGURATION OF AN OFHC COPPER REBUNCHER FOR SARAF.

6-27

Glyavin M., Denisov G.

DEVELOPMENT AND APPLICATIONS OF HIGH POWER THz SOURCES WITH UNIQUE PARAMETERS: REVIEW OF IAP RESULTS.

6-32

Lurie Yu., Bratman V., Savilov A.

THz COHERENT SPONTANEOUS UNDULATOR EMISSION FROM SHORT ELECTRON BUNCHES IN NEGATIVE MASS REGIME.

6-39

Einat M., Moritz P.

LONG PULSE 95 GHz GYROTRON WITH ROOM TEMPERATURE SOLENOID.

6-51

Yahalom A.

RETARDATION EFFECTS IN ELECTROMAGNETISM AND GRAVITATION.

6-58

Jerby E. and Meir Y.

LOCALIZED MICROWAVE-HEATING IN SOLIDS, PLASMAS AND POWDERS, AND ITS POTENTIAL APPLICATIONS.

6-69

Bondarenko S., Komoshvili K.

INERTIAL CON_NEMENT AS A MODEL OF PARTICLES INTERACTING AT HIGH ENERGIES AND A CORRECTION TO THE DEBYE LENGTH.

6-79

AUTHORS INDEX

x

commit2004.jpg (1778 bytes)